Motorized linear guide / steel max. 10 lbs, max. 150 mm/s | ETL series 电动直线导轨/钢最大10磅，最大150毫米/秒| ETL系列
Description
描述
This linear stage line is offered in travel lengths from 400mm to 600mm. The ETL comes standard with a high torque size 23 or optionally, a MDrive intelligent stepper motor. Both motor options are also available with rotary encoders. End of travel limit switches come standard on the ETL stages.
这种线性阶段线提供的旅行长度400mm至600mm。ETL标准高扭矩大小23或任选一个mdrive智能步进电机。这两个电机选项也可与旋转编码器。结束行程限位开关来抽取阶段标准。
The drive system utilizes a stainless steel rolled lead screw to move the carriage. The carriage uses four recirculating ball bushings which rides on two ground case hardened shafts supported at the ends of the stage.
该驱动系统采用不锈钢轧制丝杠，使其移动。运输采用四循环滚珠衬套，乘坐两个地面硬化在舞台的两端支承轴。
All ETL products are machined from 6061 aluminum alloy and black anodized.
所有的ETL产品从6061铝合金加工和黑色阳极氧化。
Motorized linear guide / steel max. 10 lbs, max. 150 mm/s | ETL series 电动直线导轨/钢最大10磅，最大150毫米/秒| ETL系列